How To Set A Static IP Address

An IP address can sometimes be reset to the default address 192.168.192.168 for Epson printers; if you pull the IP address and find that it's been reset, you can use EsponNet Config to update the IP address manually.

After you install EsponNet Config, please turn on the printer and connect it to your computer via an ethernet cable. After opening EpsonNet Config, you will see the connected device, along with additional information about the device.

Double-click on the device you would like to configure and you'll be taken to the 'Device Properties' screen. Click on 'Basic' under 'TCP/IP' and click 'Manual' to enter the IP address for your device.

After entering the IP Address, Subnet Mask, and Default Gateway, click 'Transmit' to save your settings. Please follow the instructions above to pull the IP address to ensure the IP address is updated correctly. 

For questions about configuring your IP address manually or assisting with configuring your printers, please contact our Support Team at bb-support@doordash.com.